| With this feature... |
Do this... |
| Save Location |
By default, this is the location automatically created in the Kingdom project folder when GeoSyn was launched from Kingdom. It's best to use this location for simplicity and synchronization. |
| Save GeoSyn File |
Select whether to save the GeoSyn file along with the other data used by Kingdom. This is the model that's tied to the imported Kingdom seismic section. |
| Save SEGY Model |
Select whether to save a single trace from the seismic file in SEGY format. This file is required by Kingdom in order to stay synchronized with the original GeoSyn model. |
| Zero Offset Model |
Select the model tied to the seismic section. |
| Multiplier |
Type a function of the amplitudes that occur in the seismic line, which is typically around 12,000. This enables the amplitudes in the model to match those found in the original seismic section. |
| Start Time 2way |
Type the shift that occurred in GeoSyn when you tied the seismic section to the model. |
| Save Time/Depth Chart... |
Select whether to save the time depth chart directly to the Kingdom database. If Save As Default is enabled, this time depth chart is associated with future wells you import from Kingdom into GeoSyn. This same file that can be saved from GeoSyn using the File > Export > Time/Depth option. |
| Cull Time/Depth Values... |
Type the sonic log values above which to block when creating the time depth chart. |
| Local | Shared |
Select whether the time depth chart is only available to a specific well (local), or all wells (shared). |